Spherical Bearings

The outer spherical ball bearing is actually a variant of the deep groove ball bearing. Its characteristic is that its outer ring outer diameter surface is a spherical surface, which can be fitted into the corresponding concave spherical surface of the bearing seat to play the role of centering. The outer spherical bearing is mainly used to bear the combined radial and axial load based on the radial load, and it is generally not suitable to bear the axial load alone.

Product Features

It is mainly used to bear the combined radial and axial load based on the radial load. Generally, it is not suitable to bear the axial load alone. This type of bearing can be installed with an inner ring (with a full set of rollers and retainers) and an outer ring separately. This kind of bearing does not allow the shaft to be tilted relative to the housing, and additional axial force will be generated when the radial load is used. The size of the axial clearance of this kind of bearing is very important to the normal operation of the bearing. When the axial clearance is too small, the temperature rise is higher; when the axial clearance is large, the bearing is easy to be damaged. Therefore, special attention should be paid to adjusting the axial clearance of the bearing during installation and operation, and pre-interference installation can be used if necessary to increase the rigidity of the bearing.

Product Parameters

The performance of the outer spherical ball bearing with the eccentric sleeve is basically the same as that of the outer spherical bearing with the top wire, except that the top wire is not on the inner ring, but on the eccentric sleeve. The inner hole of the tapered outer spherical ball bearing is a tapered hole with a taper of 1:12, which can be directly installed on a tapered shaft or on an optical shaft without a shoulder with the aid of a tightening bushing, and the bearing clearance can be fine-tuned.

Application and After-Sales Service

Outer spherical bearings are preferentially suitable for occasions that require simple equipment and parts, such as agricultural machinery, transportation systems or construction machinery.
The company processes and manufactures various and all kinds of international brand bearings.
After-sales service tenet
First, the work of the after-sales service department
Customers buy products sold in our company, just the beginning of our company, but also the beginning of the after-sales service department, in the entire stage of our customers, all of our after-sales service personnel take thoughtful, meticulous, enthusiasm, timely service Let customers.